Product Documentation

Grade Crossing Controller


Articles and Application Notes:

Card size:2.50" x 2.00"
Mounting hole size:0.125"
Suitable for #4 screws
Detector inputs:3 detectors per track
Inputs for two tracks provided.
Additional tracks supported with additional GCC units.
Power supply:8-16 volts DC
Less than 100 mA, depending on output load
Outputs available:1 active high (+5 volts when activated)
1 active low (0 volts when activated)
2 alternating at 1 Hz rate
2 that switch between V+ and V- when activated or deactivated - suitable for driving a stall-motor device
Output connectors:Screw terminal blocks
ROHS compliant:Yes
Approximate kit assembly time:25 - 30 minutes